Onda Lifting at Kkeut Oriental Medicine Clinic, what makes it special?

1. Pre-treatment design + Handpiece strategy planning

At Kkeut Oriental Medicine Clinic, the director personally designs the lifting treatment. We carefully identify areas requiring elasticity improvement and contour refinement, then precisely distribute 3mm / 7mm handpieces. Areas prone to hollowing are avoided, while areas needing tightening are targeted intensely.

2. Sufficient Energy Guarantee

Energy can be set from 60,000 to 120,000 joules for the face, and it's not simply about applying a lot; a customized design is made to suit the patient's skin condition and goals.

3. Skilled Speed Control

Onda is a device whose effects vary depending on the handpiece speed. Kkeut Oriental Medicine Clinic adjusts the speed slowly for areas requiring heat accumulation and quickly for sensitive areas, maximizing effectiveness without overheating.

4. Customized Shot Distribution by Area

Beyond simply using 3mm/7mm handpieces, shots are precisely distributed according to the patient's volume and fat distribution. For example, for patients with very little fat, the focus is on 3mm, while for those with significant fat in the double chin or lower jaw, the proportion of 7mm is increased.

The Subtle Difference of Onda Lifting

At Kkeut Oriental Medicine Clinic, for Onda Lifting procedures, instead of starting and maintaining only 90W,

we use a method of rapidly raising the temperature with high output (100-110W) initially, then maintaining it at 90W.

The Subtle Difference in Kkeut Oriental Medicine Clinic's Procedure Method!

Shortening the time to reaction point:

Even with the same total energy delivered, starting with high output raises tissue temperature faster.

This means the time to reach the energy accumulation zone is shortened,

and thus, the point at which the skin begins to react is advanced.

Minimizing energy loss in the core reaction zone:

High-output, short-duration irradiation allows the necessary temperature to be reached before heat disperses to surrounding areas,

thereby inducing a dermis and fat layer-centric reaction without damaging the epidermis.

High efficiency compared to short treatment time:

If treated only with 90W, it takes longer to reach the reaction zone,

and more joules may need to be applied to create a sufficient thermal reaction.

On the other hand, a high-output start completes the necessary heat delivery in a short time,

and subsequent power adjustment ensures safety.

Differences felt from the customer's perspective:

▶ Compared to 90W single treatment

→ The lifting effect is felt more quickly,

→ The sensation of skin feeling firm and tightened immediately after the procedure is more pronounced.

Furthermore, since the output is adjusted before the sensation of heat exceeds a certain level,

→ Pain or discomfort during the procedure does not become excessive.

Consequently, even with the same 60,000 joules, depending on the power adjustment,

the results can be completely different,

and Kkeut Oriental Medicine Clinic demonstrates that difference through results.

Onda Lifting Features

Lifting and Tightening Simultaneously

Onda Lifting is a next-generation premium lifting device that uses ultra-short microwave (2.45GHz) to deliver heat to the dermis and subcutaneous fat layers, achieving both lifting and tightening effects simultaneously.

Its main characteristic is that it works by vibrating water molecules to generate frictional heat, similar to a microwave, inducing collagen contraction and production, and even fat cell destruction, thereby enabling immediate lifting effects.

Microwaves have the property of being absorbed by water in the skin to generate heat, allowing them to selectively deliver strong stimulation to the dermis and subcutaneous fat layers without irritating the epidermis.

Unlike other lifting devices, Onda's advantage is its ability to perform both lifting and tightening simultaneously with a single device.

Lifting focuses on contouring, while tightening focuses on skin texture and elasticity. Onda is designed to address both simultaneously.

Core Principles of Onda Lifting

Onda Lifting utilizes 3mm and 7mm handpieces.

3mm handpiece: Delivers energy to the boundary between the dermis and subcutaneous fat layer.

When heat is applied to this depth, it stimulates the production of collagen and elastin fibers, promotes hyaluronic acid synthesis, and causes existing collagen to contract, resulting in an immediate skin tightening effect.

Additionally, edematous fat loses water, leading to immediate changes in the body line.

7mm handpiece: This handpiece reaches deep into the subcutaneous fat layer, selectively destroying fat cell membranes and inducing their demise.

Damaged fat cells are expelled through the lymphatic system, leading to a contouring effect. Changes begin in 2-3 weeks, contour changes are noticeable after 4 weeks, with peak effects at 6 weeks. The destroyed fat cells do not regenerate, making the results semi-permanent.

Furthermore, it immediately contracts the retaining ligaments, resulting in an instant lifting effect.

Temperature Control: Collagen in the dermal layer is induced to contract at approximately 60-65 degrees Celsius. To reach this optimal temperature, a technique of slowly moving the handpiece and accumulating heat is crucial.

Water Selective Absorption Principle: Microwaves have the property of being absorbed only by water, meaning they deliver minimal stimulation to nerves and blood vessels, concentrating heat only in fat cells and the water layers within the dermis. This allows for safe lifting procedures with less pain and a low risk of side effects.

Recommended Liftings to Combine With

While Kkeut Clinic performs Onda Lifting alone, combining it with Shurink (targeting the fascial layer) or Oligio (radiofrequency tightening) maximizes synergistic effects.

Especially when performed on the same day, the reduced heat accumulation time leads to higher satisfaction.

Our Chief Physician's Sincerity

At Kkeut Clinic, we perform multiple Onda Lifting procedures daily.

However, each individual's lifting design is customized differently.

As chief physicians, we remain after procedures, contemplating how to achieve even better lifting results.

This is because we believe true lifting isn't merely operating a device, but understanding the skin's texture and flow, and designing contour changes within that understanding.

Onda Lifting: The difference lies in the human touch, not just the device.

Experience it at Kkeut Clinic.

Onda Lifting: Why the Immediate Effect?

Onda Lifting uses microwave energy to concentrate heat only at 3mm and 7mm depths within the skin.

During this process, collagen fibers are rapidly heated to over 65 degrees Celsius, causing immediate contraction, and

you can visually confirm the lifting effect immediately after the procedure.

Unlike traditional radiofrequency lifting where you have to wait for gradual changes,

the biggest differentiator of Onda Lifting is the ability to immediately feel improved elasticity and lifting.

We highly recommend it for those who desire quick results.

Kkeut Clinic Onda Lifting

1. Pre-procedure Design + Handpiece Strategy Planning

At Kkeut Clinic, precise pre-procedure design is key.

After a direct consultation with the director, we comprehensively analyze skin elasticity, fat distribution, volume presence, and lifting direction before the procedure to design the treatment areas.

Accordingly, the 3mm handpiece (focused on dermal stimulation) and the 7mm handpiece (focused on fat layer targeting) are appropriately positioned for each area.

It's not just a simple procedure, but a design-centered, strategic lifting.

2. Sufficient Energy Assurance + Detailed Settings

The total energy is crucial for Onda Lifting.

Kkeut Clinic can customize treatments from 60,000 joules to over 120,000 joules, meticulously planning the appropriate treatment time and cooling strategies to prevent overheating.

3. Handpiece Speed and Heat Accumulation Control

With Onda, heat accumulation directly translates to lifting.

Kkeut Clinic follows a routine of maintaining a slow speed for initial heat accumulation, then transitioning to a faster speed in the latter half to minimize the risk of burns.

These settings are only possible with accumulated practitioner experience.

4. Customized Handpiece Distribution and Shot Strategy

The shot strategy should differ for those with abundant cheek fat versus those with only reduced elasticity.

Ggeuthan Clinic adjusts the ratio of 3mm and 7mm handpieces according to volume, fat location, and skin thickness.

For example, areas with a lot of fat, like the jawline, are primarily treated with a 7mm handpiece, while areas immediately below the cheekbones where hollowness is a concern are primarily treated with a 3mm handpiece.

Upgrading from simple irradiation → to a customized distribution strategy.

5. Designed by Our Lead Doctors, Through Continuous Deliberation and Research

Ggeuthan Clinic performs a high volume of Onda Lifting procedures, often treating with Onda at every appointment slot each day.

However, the design is always different.

Even outside of consultation hours, our lead doctors simulate changes in patients' faces and repeatedly test energy settings and handpiece placements that maximize effectiveness.

Onda Lifting, while accessible to anyone, yields vastly different results depending on who designs the treatment.

Onda Lifting is not just a simple device treatment; it's a lifting procedure perfected by human expertise.

Recommended for

• 01. Those who want to improve their double chin, deep jowls, and jawline contour
• 02. Those experiencing deepening nasolabial folds and sagging
• 03. Those with concerns about contour and elasticity that previous lifting treatments couldn't fully address
• 04. Individuals in their 30s-50s with a combination of fat and reduced elasticity
• 05. Those who desire a lifting treatment without pain or downtime

Treatment Advantages

• 01. Excellent cooling function results in minimal pain
• 02. Immediate tightening effect
• 03. Return to daily life immediately after treatment

Treatment Process

• STEP 01. 1:1 consultation after facial cleansing
• STEP 02. Oil application
• STEP 03. Onda Lifting procedure

Post-Treatment Precautions

• •Facial cleansing and makeup are possible after the procedure.
• •Please avoid saunas, jjimjilbangs (Korean bathhouses), alcohol, and smoking for about a week.
• •You may feel dryness due to the heat sensation. Please apply plenty of moisturizer.
• •Apply sunscreen to protect your skin when going out.